• Mercury Elite 1500 Pro 1500VA/900W UPS


    Input .
    Input Voltage 220VAC
    Input Frequency 50Hz
    Input Phase Single Phase
    power cord Built-in Cable with Fuse
    Input Voltage Range(May vary as per Country requirement) 140~300VAC
    Output .
    Rating Output 1500VA
    Wave Form Battery Mode
    (Simulated sine Wave)
    AC Mode
    (Synchronize with Input)
    Rating Voltage 220V
    Output Range 220VAC – 11% to + 17%
    (Battery Mode)
    Rear Output Socket 4x Universal – Battery Backup
    Transfer Time Typical 4-8ms
    Communication Interface Nil
    Output Frequency .
    Rating Frequency 50Hz
    Line Mode Synchronize with the Utility
    Battery Mode 50Hz±1Hz
    Short Circuit Protection .
    Line Mode FUSE & Firmware Protection
    Battery Mode Firmware Protection
    Overload Protection .
    Line Mode 110%±5%
    (go to fault mode after 5 minutes)
    (go to fault mode immediately)
    Battery Mode 85%±5%
    (shut down after 5 seconds)
    (shut down immediately)
    Battery and Runtime .
    Rating 2x12V/8.2AH
    Backup Time – Typical 30mins~40mins
    (Depending On Load)
    Charging Current About 1A at Normal Mode
    OverCharge Protection 29V±0.2V(Stop Charging)
    <27V ±0.5V(Recharge)
    Packaging .
    Dimension(mm) 388x203x260
    Master Carton(mm) 425x403x280
    Packsize per Master Carton(mm) 2
  • UPS Mercury ELITE 1000 PRO PC 1000

    UPS Mercury ELITE 1000 PRO PC 1000VA

    • Rating output (VA) 1000VARating output (W) 600WRating frequency 1x12V/9AHOutput Socket 2xUniversal
    • Audible Alarmnot specified by the manufacturer,not specified by the manufacturer
    • Battery Type12V 9AH x1. 8mins-20mins (Depending On Load).,12V 9AH x1. 8mins-20mins (Depending On Load).
    • Capacity1000VA 600W,1000VA 600W
    • Device TypeUPS Battery Backup,UPS Battery Backup
    • Full protectionOutput Short Circuit Protection. Over Temperature Protection. Overload Protection. Dataline Protection Surge Protection,Outpu
    • Input phase Single phase
    • Input voltage 220VAC
  • UPS Mercury ELITE 2000 PRO VA 1 WARRANTY

    Rating input voltage 2000 VA / 1200 W
    Rating input frequency 60/50Hz (auto sensing)
    Input phase Single phase
    Input socket With Fuse
    Cold Start (0 to 100% load) Press the ON/OFF Switch
    Input Range (220V) 140-300
    Rating output(VA) 2000
    Rating output (W) 1200
    Power factor 0.6
    Rating output voltage (V) 220
    Waveform Battery mode (simulated sine wave),
    AC mode(sine wave)
    AC Voltage Regulation ±10% (Battery mode)
    Rear output socket 4 x Universal – Battery backup
    Waveform Simulated Sine Wave (Battery mode)
    Line Mode Synchronize with the utility
    Rating frequency 60Hz or 50 Hz ± 1 Hz
    Battery Mode Yellow flashing
    Short circuit protection Line Mode Fuse & Firmware protection
    Short circuit protection Battery Mode Firmware Protection
    Overload protection Line Mode 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.
    Overload protection Battery Mode 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately
    Indicators AC mode Green Lighting
    Indicators Battery Mode Yellow Flashing
    Indicators Fault Red Lighting
    Alarm Battery Mode Sounding every 10 Seconds
    Alarm Low Battery Sounding every Second
    Alarm Overload Sounding every 0.5 second
    Alarm Fault Continuously sounding
    Full Protection Overload, discharge, and
    Overcharge protection
    Transfer Time Typical 2-6ms, 10ms max.
    Transfer Time Typical 2-6ms, 10ms max.
    Communication Interface Optional RS232/RJ11
    Battery and runtime Rating 2 X 12V/9AH
    Recharge time – Typical 6-8 hours recover to 90% capacity
    Charge current About 1A at normal mode.
    Dimension, W X H X D (cm) 22.5 X 12.5 X 39
    Net Weight (kgs) 12.7KGS
    Humidity 0-90 % RH @ 0- 40°C (non-condensing)
    Noise Level Less than 45dB
    Compatible with OS Supports Windows®
    Communication interface Elite 2000pro (N/A),
    Elite 2000ipro (USB/RJ11)

    • Rating 3000VA
    • Voltage 220VAC / 230VAC / 240VAC
    • Voltage Range 140 – 300VAC
    • Voltage Regulation (Batt. Mode) +/-10%
    • Frequency 50Hz or 60Hz
    • Frequency Regulation(Batt. Mode) +/-1Hz
    • Output Waveform Modified Sine Wave
    • Battery Type 12V/9.0AH x 4
    • Recharge Time 6-8 hrs to 90% after complete discharge

Main Menu